Twisted Pair Copper Port - Allied Telesis 2914 Series Installation And User Manual

Twisted Pair
The AT-2914GP/SP network adapter is equipped with a PoE+ copper port
for a 10/100/1000BASE-T twisted pair cable. See Figure 6.
Copper Port
LED for Twisted Pair Port
The minimum cable requirement for the AT-2914GP/SP network adapter
is a TIA/EIA 568-B-compliant Enhanced 5 (Cat 5e) unshielded cable.
The twisted pair port has two LEDs. For link states and descriptions, see
Table 2.
Top-left LED
(For Twisted
Pair Port)
Top-right LED
(For Fiber Port)
Figure 6. Twisted Pair Port and LEDs
Table 2. LED Status for the Twisted Pair Port on AT-2914GP/SP
LED State
On
Off
Flashing
On
Off
Flashing
LED for Fiber Optic Port
Description
Valid link on the twisted pair port
No link on the twisted pair port
The twisted pair port is receiving or
transmitting network packets.
Valid link on the fiber optic port
No link on the fiber optic port
The fiber optic port is receiving or
transmitting network packets.
Chapter 1: Introduction
19