Table of Contents
Advertisement
2914 Series Fiber Network Adapters with WoL Installation and User's Guide
SFP Slot
LED
18
The duplex LC port has the following cable requirements:
50/125 µm (core/cladding) multimode fiber optic cable up to 500m
62.5/125 µm (core/cladding) multimode fiber optic cable up to
220m
The AT-2914SP and AT-2914GP/SP adapters have SFP slots for
100Mbps or 1000Mbps SFP transceivers. The ports operate in full-duplex
mode only. See Figure 4.
Note
An SFP transceiver must be purchased separately. For a list of
supported transceivers, see the product's data sheet.
The fiber optic port on the network adapter comes with one LED on the
front panel as shown in Figure 5. The LED indicates the link and activity
status of the port.
Figure 5. LED Except AT-2914GP/SP
Table 1 describes the link states of the LED except for the AT-2914GP/SP
model.
Table 1. LED Status Except AT-2914GP/SP
State
On
Valid link.
Off
No link.
Flashing
The port is receiving or transmitting network packets.
Figure 4. SFP Slot
Description
LED
Advertisement
Table of Contents
