Installing the Driver Software
To install the driver software, do the following:
Note
To install the driver software, you must have administrative
privileges.
1. Access the Device Manager. see "Accessing the Device Manager" on
page 48.
2. In the Device Manager window, double-click Network Adapters to
expand the field.
3. Right-click Allied Telesis AT-2914 Series Fiber Ethernet.
Note
The Device Manager may list your adapter as a Broadcom device,
or Allied Telesis device, depending on what drivers reside on your
system.
The shortcut menu appears. See Figure 21 as an example.
Figure 21. Selecting the 2914 Series Adapter in Device Manager
4. Select Update Driver Software.
The Update Driver Software window pops up. See Figure 22 as an
example.
Chapter 3: Installing the Driver Software
49