Large Send Offload V2 (Ipv4) - Allied Telesis 2914 Series Installation And User Manual

Large Send Offload v2 (IPv4)

The Large Send Offload v2 (IPv4) feature allows you to control the load of
sending out large packets. When this feature is enabled, the adapter port
segments large packets for IPv4 traffic and reduces the CPU load.
This feature, which supports large packets up to 256kb, overrides the
Large Send Offload (IPv4) feature if both features are enabled.
To enable or disable the Large Send Offload v2 (IPv4) feature, do the
following:
1. Access the Advanced Properties.
See "Accessing Advanced Properties" on page 71.
2. Select Large Send Offload v2 (IPv4) in the Property box.
The Large Send Offload v2 (IPv4) page is displayed as shown in
Figure 37.
Figure 37. Large Send Offload v2 (IPv4) Page
3. Select one of the following options:
Disable — The feature is disabled.

Enable — The adapter port segments large packets up to 256kb

for IPv4 traffic before sending them out. This is the default setting.
4. Click OK.
Chapter 6: Modifying Advanced Properties
79