Table of Contents
Advertisement
Changing the
VLAN ID for the
PC Traffic
Changing the
QoS Priority
Level for the PC
Traffic
4. Press Enter to continue.
You can specify the VLAN ID for the PC traffic. The default setting is 0.
To specify the VLAN ID for the PC traffic, perform the following procedure:
1. Enter 5 at the Console prompt:
>> 5
A "New VID (decimal)" prompt is displayed.
2. Enter the new VID and press Enter.
The "please apply settings" prompt is displayed to indicate changes
have been made but not yet applied.
3. Enter 7 at the Console prompt to apply the new setting:
>> 7
VLAN Configuration Applied prompt is displayed.
4. Press Enter to continue.
You can specify the QoS priority level for the PC traffic. The default setting
is 0.
To specify the QoS priority level for the PC traffic, perform the following
procedure:
1. Enter 6 at the Console prompt:
>> 6
A "New QoS (decimal)" prompt is displayed.
2. Enter the new QoS priority level and press Enter.
The "please apply settings" prompt is displayed to indicate changes
have been made but not yet applied.
3. Enter 7 at the Console prompt to apply the new setting:
>> 7
VLAN Configuration Applied prompt is displayed.
4. Press Enter to continue.
Chapter 4: Configuring the VLAN and Priority
63
Advertisement
Table of Contents
