Table of Contents
Advertisement
2914 Series Fiber Network Adapters with WoL Installation and User's Guide
Wake on Magic Packet
96
The Wake on Magic Packet feature enables the adapter to wake up from a
low-power mode when the adapter port receives a Magic packet.
To enable or disable the Wake on Magic Packet feature, do the following:
1. Access the Advanced Properties.
See "Accessing Advanced Properties" on page 71.
2. Select Wake on Magic Packet in the Property box.
The Wake on Magic Packet page is displayed as shown in Figure 48.
Figure 48. Wake on Magic Packet Page
3. Select one of the following options:
Enable — The adapter wakes up from a low-power mode when
receiving a Magic Packet. This is the default setting.
Disable — The adapter stays in a low-power mode when receiving
a Magic Packet.
4. Click OK.
Advertisement
Table of Contents
