Standard Bracket Two-Post Installation; Two-Post Five-Inch-Offset Switch Installation - Dell EMC PowerSwitch N3200-ON Series Installation Manual

To uninstall the switch, unscrew the four mounting tray screws and slide the switch from the mushroom head hooks.

Standard bracket two-post installation

This switch installation procedure is for the compact N3208PX-ON switch only. Use these brackets for front- or center-mount
installation.
NOTE: Do not use this installation procedure for the full-width N3200-ON Series switches.
You must order the mounting supplies for this installation separately.
For a front-mount installation, align the standard bracket rackmount ends with the I/O-side of the switch. For a center-mount
installation, align the standard bracket rackmount ends away from the I/O-side of the switch.
1. Remove the two standard brackets and screws from the shipping box.
2. Insert the standard bracket onto the mushroom head on each side of the switch and slide the bracket back to lock it into
place.
● For a front-mount installation, the standard bracket ears face the I/O-side of the switch.
● For a center-mount installation, the standard bracket ears face the PSU-side of the switch.
3. Attach the standard brackets to the switch using four screws for each bracket.
4. Slide the switch into the two-post rack until the standard bracket ears line up with the rack.
5. Attach the switch to the two-post rack using two #12-24 screws on each side.
To uninstall the switch from the rack, unscrew the four #12-24 rackmount screws and slide the switch out of the rack.

Two-post five-inch-offset switch installation

This switch installation procedure is for the full-width N3200-ON Series switches only.
NOTE: Do not use this installation procedure for the compact N3208PX-ON switch.
NOTE: For the N3224PX-ON, N3248P-ON, and N3248PXE-ON switches, to install an external power supply, see the
External Power Supply (EPS) Installation for the Dell EMC PowerSwitch N2200-ON and N3200-ON Series Switches at
www.dell.com/support.
The mounting supplies for this installation ship with the switch.
1. Locate the mounting brackets and screws.
N3200-ON Series switch installation 31