Residual Risk Assessment; Safety Labels And Their Meaning - SaMASZ KDF 301 W Operator's Manual

never operate the mower when it is not in working order or has damaged safety guards,
never get your hands and legs close to rotating parts of the mower,
during repair and maintenance of the mower, always comply with descriptions included in
operator's manual. Always do these activities when the tractor's drive is off,
never operate the mower under influence of alcohol, drugs, or strong medicine that impair
your attention,
do not wear clothes or jewelry that are too loose or too tight. Too loose clothing or jewelry
may be pulled in by the rotating parts of the mower,
the mower should not be operated by children or by handicapped people,
When describing residual risk, the mower complies with the state of the art in technology on the
date it was manufactured.

4.9. Residual risk assessment

Residual risk occurs from not complying with the instructions and safety precautions. Such risk can
be minimized by doing the following:
thorough familiarizing yourself with operator's manual,
allow no persons on the machine when operating,
allow no persons within the mower operation range,
adjust, maintain and lubricate the machine with the engine off,
only skilled persons should perform repairs of the machine,
children and strangers must keep away when the machine is operating,
When the risk of exposure to noise cannot be avoided or eliminated by any
protective means or organization of work, the employer (farmer) must:
1) provide the operator with individual means of noise protection if the noise
level in work place exceeds 80 dB.
2) provide the operator with individual means of noise protection and supervise
the correctness of its usage, if the noise level in work place reaches or exceeds
85 dB.

4.10. Safety labels and their meaning

Safety labels are critical to safe use of this mower. They must be read, understood and followed.
Also, be sure that:
All warning decals are clean and legible
All lost or damaged decals are replaced by ordering new decals from your dealer or supplier
All persons using this mower have read the section of this manual explaining the meanings of
these labels
All spare part used for repair of the mower should have all safety labels provided by the
manufacturer.
N-01
Be extremely careful when
PTO shaft is rotating!
Operator's manual
N-02
Caution – cutting knives.
Approach during operation
is forbidden!
- 14 -
Front disc mowers
N-03
Caution – read the
operator's manual before
putting the mower into
operation!
KDF
N-04
Caution – while making
repairs the machine must be
stopped