Table of Contents
Advertisement
Cable and fiber installation
............................................................................................................................................................................................................................................................
Table 3-4 Dual harness DS1/E1 for VLIU2 and VLIU10 applications
Legend:
* Indicates the primary pin pairing directions for ports 1 to 16
**Indicates the secondary pin pairing directions for ports 17 to 28.
Procedure
Proceed as follows:
Important!
connections. If a bundle of 16 DS1/E1 cable assemblies is ordered, use this harness for
terminating two Alcatel-Lucent 1850 TSS-5 shelves.
Important!
or 21 E1 connections. Use the Dual harness cable assembly for terminating 28 DS1/E1
on the VLIU2 or VLIU10 paddle boards. Use
VLIU2/VLIU10 dual cable harness" (p. 3-8)
VLIU2 and VLIU10 applications" (p. 3-6)
Note:
DS1s) and 4 single harness cables should be used. Use
port assignments" (p. 3-8)
cables and 11 single harness cables should be used. Use
E1 RJ-45 port assignments" (p. 3-8)
If the VLIU paddle board is a VLIU10, double the amount of cables if and only if the
application is 0X1 for terminating 56 (24 Dual harness and 8 single harness)
independent DS1s and 42 (10 dual harness and 22 single harness) independent E1s.
............................................................................................................................................................................................................................................................
3 - 6
Tip/Ring
Pin
Designation
1
Ring*
2
Tip*
4
Ring*
5
Tip*
3
Ring**
6
Tip**
7
Ring**
8
Tip**
The Alcatel-Lucent 1850 TSS-5 VLIU1 only terminates 8 DS1/E1
The Alcatel-Lucent 1850 TSS-5 VLIU2 and VLIU10 terminate 28 DS1
To terminate 28 DS1s on a VLIU2 paddle board, 12 Dual harness cables (24
as a visual guide. For terminating 21 E1s, 5 Dual harness
Direction
Color
Out
W-Green
Out
Green
In
W-Orange
In
Blue
Out
W-Blue
Out
Orange
In
W-Brown
In
Brown
Table 3-2, "RJ-45 pin out for
and
Table 3-4, "Dual harness DS1/E1 for
as a guide for proper DS1/E1 terminations.
Figure 3-3, "VLIU2 DS1 RJ-45
Figure 3-4, "VLIU2/VLIU10
as visual guide.
DS1/E1 cable installation
365-372-403R5.1
Issue 1 November 2008
Advertisement
Table of Contents
