Table of Contents
Advertisement
Chapter 1 Install the Shelf and Common Control Cards
Figure 1-31
Continue with the
Step 6
Stop. You have completed this procedure.
NTP-G14 Install DWDM Equipment
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Complete the
Step 2
Complete the
Step 3
Complete the
Step 4
Complete the
Step 5
Complete the
Step 6
78-17704-02
Installing the Rear Cover
"NTP-G14 Install DWDM Equipment" procedure on page
This procedure installs the optional DWDM assemblies.
#2 Phillips Dynamometric screwdriver
Crimping tool (large enough for #10 to #14 AWG)
#14 AWG wire
NTP-G2 Install the Shelf Assembly, page 1-8
As needed
Onsite
None
NTP- G14 Install DWDM Equipment
1-67.
as needed.
as needed.
as needed.
Cisco ONS 15454 DWDM Procedure Guide, R8.0
as needed.
as needed.
as needed.
1-67
Advertisement
Chapters
Table of Contents
