Cisco ONS 15454 ETSI Manual page 35

Chapter 1 Install the Shelf and Common Control Cards
Figure 1-16
Return to your originating procedure (NTP).
Step 9
DLP-G16 Connect the Office Ground to the ONS 15454 ANSI
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
78-17704-02
Grounding the ONS 15454 ETSI
F A N
F A IL
C R
IT
M A
J
M IN
This task connects ground to the ONS 15454 ANSI shelf.
#2 Phillips Dynamometric screwdriver
Medium slot-head screwdriver
Small slot-head screwdriver
Screws
Power cable (from fuse and alarm panel to assembly), #10 AWG, copper
conductors, 194 degrees F [90 degrees C])
Ground cable #6 AWG stranded
Listed pressure terminal connectors such as ring and fork types; connectors
must be suitable for #10 AWG copper conductors
DLP-G13 Remove the Lower Backplane Cover, page 1-28
Required
Onsite
None
NTP- G16 Connect the Office Ground to the ONS 15454 ANSI
Ground
Cisco ONS 15454 DWDM Procedure Guide, R8.0
1-35