Cisco ONS 15454 ETSI Manual page 20

NTP- G8 Install the Air Ramp for Standard and Deep Door ONS 15454
Figure 1-7
Front
Front
To install the 19-inch and 23-inch brackets in an ONS 15454 ANSI deep door, remove the screws that
Step 8
attach the mounting bracket to the side of the shelf assembly.
Align the mounting bracket screw holes against the shelf assembly screw holes according to
Step 9
The bracket mounting holes will align with the forward-most mounting holes on the air ramp. When
Step 10
aligned properly the mounting flange will be 80 mm from the front edge of the air ramp.
Cisco ONS 15454 DWDM Procedure Guide, R8.0
1-20
Positioning 19" or 23" Reversible Brackets on ONS 15454 ANSI with STD Door and
Spool
124 mm
Side View
Chapter 1 Install the Shelf and Common Control Cards
124 mm
Figure 1-8.
78-17704-02