Keysight Technologies X Series Measurement Manual page 46

APD (Amplitude Probability Distribution) Measurements
Making a Measurement
Step
5. Adjust other
parameters for your
test
The MXE allows you to either make measurements using autocoupled settings or manual settings.
When using autocoupled settings, the limits and input attenuation settings used during the
measurement are determined by your measurement frequency and terminal selection. These
autocoupled settings provide the appropriate limit values as given in CISPR 14.
46
Action
Meas Time
a. Press to change the
measuring time
Signal List
b. Press to mark, delete
or sort the signal under test
Measure
c. Press to select what
signals to be tested, All or
Marked
Notes
Keysight N6141A Measurement Guide