Keysight Technologies X Series Measurement Manual page 33

Disturbance Analyzer (Click) Measurements
Making a Measurement
Setting up the Disturbance Analyzer measurement
The Click measurement can be set up using either the Setup Table screen, the
menu keys or a combination of both. The following procedure guides you
through the measurement using the menu keys.
Step
1. Frequency selection
2. Terminal selection
Keysight N6141A Measurement Guide
Action
Frequency
a. Press and
select one of the
configured frequency keys
Or
Frequency
b. Press ,
Manual Frequency
enter the desired
frequency using the
numerical keypad
Terminal
a. Press and select
one of the configured
terminal keys
Notes
For more information see
page 40
.
When using autocoupled settings,
once you have selected a
frequency, the MXE will
automatically select the
appropriate limit and attenuation
and
settings for the currently selected
Terminals setting.
For more information see
page 40
.
"Frequency" on
"Terminal" on
When using autocoupled
settings, once you have selected
a Terminal choice, the MXE will
automatically select the
appropriate limit and attenuation
settings for the currently
selected frequency.
33