Keysight Technologies X Series Measurement Manual page 34

Disturbance Analyzer (Click) Measurements
Making a Measurement
Step
3. If a manual limit
choice is desired
4. If a manual
attenuation setting is
desired
5. If a manual click rate
is desired
(It is recommended
that the Measured
click rate be used.)
6. Set the duration of the
measurement
34
Action
Limit
a. Press to select
and enter the desired
value using the
numeric keypad.
b. Select the units key.
Attenuation to
a. Press
select Man and enter
the desired value using
the numeric keypad.
dB
b. Select the units key.
Click Rate to
a. Press
select User and enter
the desired value using
the numeric keypad.
Enter
b. Select the key.
Duration to
a. Press
access the menu keys
that enable you to set
hours, minutes and
seconds.
b. Select each key and enter
the desired value followed
Enter
by the key.
Notes
Man
For more information see
For more information see
page 40
.
For more information see
page 41
.
For more information see
page 41
.
Keysight N6141A Measurement Guide
"Limit" on page 40
.
"Attenuation" on
"Click Rate" on
"Duration" on