Installation Instructions; Overview; Important Safety Instructions - Lucent Technologies PARTNER Voice Messaging Installation And Programming Manual

Table of Contents

Advertisement

Installation Instructions

Overview

PARTNER Voice Messaging Release 2.0 has one PC card that supports up to four mailboxes. Two
types of PARTNER Voice Messaging PC Cards are available for Release 3 (and later). The R3S
card supports up to 4 mailboxes, while the R3L card supports up to 16 mailboxes. The
communications system processor module uses PC cards for PARTNER Voice Messaging, for
backup or restore functions, for software upgrades, and for Automatic System Answer/Direct
Extension Dialing (ASA/DXD) functions.
Make sure that you have the required PARTNER Voice Messaging PC Card and PARTNER ACS
Release 1.1 or later or PARTNER Endeavor Release 1.0 before beginning these installation
procedures.
If you are using Release 1.0 of the Partner ACS processor module, you will need to upgrade to
Release 1.1 or later before you can install the PARTNER Voice Messaging PC Card. Contact your local
Authorized Dealer.

Important Safety Instructions

Always follow these basic safety precautions when using this product:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Do not drop, bend, or crush the card.
4. Keep the card away from moisture, high temperatures, and direct sunlight.
5. Keep the connector on the card clean.
CAUTION:
Before starting, verify that you have batteries installed in the PARTNER communications
system processor module (If extension 10 shows the
display, replace the batteries without turning off the system.)
ReplaceSysBat W/Power On
3
message in the
Overview
13

Advertisement

Table of Contents
loading

Table of Contents