Table of Contents
Advertisement
PARTNER Voice Messaging Installation and Programming
Specifying VMS Cover Rings
Use the appropriate procedure to specify the number of times calls ring before they are sent to the
voice messaging system as indicated on the System Configuration Form, Page 2, VMS Cover
Rings.
For PARTNER ACS Release 3.0 or later (#321)
1. Press #321 .
2. Enter the number of the first extension for which VMS Cover Rings is to be specified.
3. Press D until the appropriate value displays.
4. To program another extension, press n or p until the appropriate value displays.
5. Repeat Steps 3 and 4 for each extension for which VMS Cover Rings is to be specified.
For All Other Communications Systems (#117)
1. Press #117 .
2. Enter the VMS Cover Rings setting (1 to 9) specified on the System Configuration Form.
3. Press f00 to exit programming mode.
Specifying VMS Cover Rings
32
Advertisement
Table of Contents
