Pannoramic 250 FLASH III 3.0.2 User's Guide
5 Scanning modes and settings
After microscope initialization, if fluorescence hardware option is provided, you can select from the
following two modes:
Brightfield scanning mode (see chapter 5.1 Brightfield Scanning Mode for more information)
•
Fluorescence scanning mode (see chapter 5.2 Fluorescence Scanning Mode for more
•
information)
Option modes
•
◦
◦
◦
In accordance with the selected mode, the Profile Settings Panel and the Microscope Control Panel
views are modified.
5.1 Brightfield Scanning Mode
Microscope View consist of three different sections:
Main functions: Located at below the window header, these functions are identical in both
•
modes.
Profile Settings panel: Profile settings containing parameters used for scanning.
•
Microscope Control Panel: Live microscope movement functions
•
September 16, 2020 – Rev. 1
Scanner mode
Services (see chapter 5.6 Services and Settings for more information)
Settings (see chapter 5.6 Services and Settings for more information)
Figure 25 – Main window of Brightfield Microscope mode
3DHISTECH Ltd.
5 Scanning modes and settings
56(156)