Table of Contents
Advertisement
PANNORAMIC® DESK FLASH DX
Initiating the Scanning Process
Warning!
The door of the Scanner must always be closed while operated! Never open door unless
prompted accordingly by the PANNORAMIC® Diagnostic Scanner Software. The door is
equipped with an interlock switch. It automatically stops a running digitization process
whenever it is opened.
Click
at the function bar of the PANNORAMIC® Diagnostic Scanner Software to launch
scanning process. The scanning of slide is being performed after initiating the scanning process.
Aborting the Scanning Process
Click
at the function bar of the PANNORAMIC® Diagnostic Scanner Software to stop the
scanning process. Note, that the actual slide is being scanned, but the rest of the slides in the
queue will not be.
The scanning process can be continued by clicking
Unloading the Scanner
Removing the Slide from the Scanner
1. Click
Software.
2. The following message appears on the screen, and select one of the options:
click Yes if you want to insert another slide; No if you do not want to insert
another slide (the specimen holder moves to the loading/unloading position
when selecting any of these two options); and click Cancel to exit the window
without ejecting the slide.
56
THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.
on the main toolbar of the PANNORAMIC® Diagnostic Scanner
INFORMATION FOR USE – FOR INVESTIGATIONAL USE ONLY.
again.
OPERATION
Advertisement
Table of Contents
