Pannoramic 250 FLASH III 3.0.2 User's Guide
4.1.2 Exiting the software
To exit the software, Click X at the main window header to close the program. Note, that when exiting
the software, the loaded slide will be automatically unloaded.
4.2 Main window functions
The following functions are available for you to select from at the main menu bar:
– switch between Microscope and Planner modes
Microscope initialization – all motors and the preview camera during start-up
Brightfield mode – the camera set for brightfield scanning is initialized
Fluorescence mode – the camera set for fluorescence scanning is initialized
Remote server hosting – start and host a live Teleconsultation session (see chapter 5.7 Hosting)
September 16, 2020 – Rev. 1
Figure 18 – Pannoramic® Scanner 3.0.2 main window
3DHISTECH Ltd.
4.1.2 Exiting the software
39(156)