Installation; Operation System Of The Control Computer - 3DHISTECH Pannoramic 250 FLASH III User Manual

Pannoramic 250 FLASH III 3.0.2 User's Guide

2 Installation

The installation of Pannoramic® 250 FLASH III must be carried out by
trained professionals! In any other case the warranty will be
automatically voided. Supplier/Distributor is not liable for any damages
caused by an installation that is not carried out by a professional
person.
Only qualified service assistants are allowed to install the hardware and software. The product is
ready for use after installation.
Make sure that the device is placed so that there is enough space for
ventilation and for safe and efficient operator maintenance.
If the temperature of the location where the scanner is operated is
much lower than the temperature of the equipment (for example, the
device is brought in from an outer storage, or has been transported to
the site), please leave enough time to normalize the temperature
differences before operating the device within the safe range.

2.1 Operation system of the control computer

The scanner is shipped with Windows 10, but it is also fully compatible with previously sold systems
running Windows 7 if the PC meets the minimum hardware requirements (see table Control
computer, minimum system requirements in chapter 8 Technical data).
September 16, 2020 – Rev. 1
Warning!
Caution!
Caution!
3DHISTECH Ltd.
2 Installation
24(156)