Scanning Modes And Settings; Brightfield Scanning Mode - 3DHISTECH Pannoramic SCAN II User Manual

Pannoramic SCAN II 2.2.0 User's Guide

5 Scanning modes and settings

After microscope initialization, if FL HW option is provided, you can select from the following two
modes:
Brightfield scanning mode (see chapter 5.1 Brightfield Scanning Mode for more
•
information)
Fluorescence scanning mode (see chapter 5.2 Fluorescence Scanning Mode for more
•
information)
Option modes
•
◦
◦
◦
In accordance with the selected mode, the Profile Settings Panel and the Microscope Control Panel
views are modified.

5.1 Brightfield Scanning Mode

Microscope View consist of three different sections:
Main functions: Located at below the window header, these functions are identical in both
•
modes.
Profile Settings panel: Profile settings containing parameters used for scanning.
•
Microscope Control Panel: Live microscope movement functions
•
January 24, 2020 - Rev. 2
Microscope mode
Settings (see chapter 5.6 Settings and Service for more information)
Services (see chapter 5.6 Settings and Service for more information)
Figure 18 – Main window of Brightfield Microscope mode
3DHISTECH Ltd.
5 Scanning modes and settings
52(156)