Microscope Control Panel - 3DHISTECH Pannoramic 250 FLASH III User Manual

Pannoramic 250 FLASH III 3.0.2 User's Guide

5.1.2 Microscope Control Panel

The Microscope Control panel includes the main control features of the microscope.
5.1.2.1 Preview Window
The Preview panel offers options for threshold setting and selection of the area to be scanned.
Threshold options
This section is located at right side of the preview window. Scanmap Source is designed to set which
type of scanmap is used on the preview image. This scanmap is displayed automatically in the Profile
Scanmap Source setting. Selectable scanmap types are the following:
Use threshold
•
Load previously saved Scanmap from file
•
Custom Scanmap
•
September 16, 2020 – Rev. 1
Figure 31 – Preview panel
3DHISTECH Ltd.
5.1.2 Microscope Control Panel
64(156)