Installing An Ipp310 Pin Pad - Ingenico iCT250 Operating Manual

SKYZER TECHNOLOGIES

5.3 Installing an iPP310 PIN pad

To install an iPP310 PIN pad, perform the steps below:
NOTE: Refer to page 19 to see Port Layout as where the PIN pad cable will be
connected to on the iCT250 terminal. When plugging in, please ensure that the
terminal is powered off.
Step Terminal Display
1.0
NITRO
2.0
PAYMARK EFTPOS
1. EFTPOS MENU
2. ADMIN MENU
3. SUPERVISOR MENU
3.0
ENTER PASSWORD?
4.0
0 – TELIUM MANAGER
5.0
1- Consultation
2- Evolution
3- Initialization
4- Diagnosis
6.0
1- Parameters
2- Hardware
3- Password
4- Header
7.0
Date and time
Language
Terminal Number
Currency
Terminal Number
Currency
Pabx
Pinpad
8.0
PINPAD
No
Yes
Autodetect
NITRO INGENICO ICT250 AND IWL252 2015 PAYMARK SOFTWARE OPERATING GUIDE
Comment
Press MENU
Enter 0 (zero).
Enter 6988 and press ENTER.
Select TELIUM MANAGER.
Press number 3 key to select INITIALIZATION.
Press number 1 key to select PARAMETERS
Use the down arrow key to scroll down to pinpad and Press ENTER key to select
PINPAD
Select YES and press the ENTER key
PAGE 39 OF 116
Version 1.0