Section 4: Adjustments - Land Pride SB10 Series Operator's Manual

Section 4: Adjustments

Section 4: Adjustments
Hitch Pin Locations
The lower 3-point hitch pins and upper center bolt-on
bushing can be arranged in the A-frame hitch three
different ways depending on user preference.
Standard 3-Point & Quick Hitch Hook-up
Refer to Figure 4-1:
This is the most commonly used arrangement.
1. The lower 3-point hitch pins are located in the bottom
clevis holes.
2. Bushings, if need, can be added to the lower 3-point
hitch pins when using a Quick Hitch. (Lower 3-point
bushings are supplied by the customer.)
3. The tractor's center 3-point link is attached to the
upper center hitch holes with a hitch pin and secured
with a hitch pin keeper. (Hitch pin and hitch pin
keeper are supplied by the customer.)
4. The center bushing is for Quick Hitch attachment and
is bolted in the lower center hitch holes.
Special 3-Point Hook-up
Refer to Figure 4-2:
This arrangement is used when the tractor's lower
3-point arms will not go low enough to remove snow
close to the ground.
1. The lower 3-point hitch pins are located in the upper
clevis holes.
2. The tractor's center 3-point link is attached to the
upper center hitch holes with a hitch pin and secured
with a hitch pin keeper. (Hitch pin and hitch pin
keeper are supplied by the customer.)
Special Quick Hitch Hook-up
Refer to Figure 4-3:
This arrangement is used with a Quick Hitch attached to
the tractor and the tractor's lower 3-point arms will not go
low enough to remove snow close to the ground.
1. The lower 3-point hitch pins are located in the upper
clevis holes.
2. Bushings can be added to the lower 3-point hitch
pins when needed for the Quick Hitch. (Lower
3-point bushings are supplied by customer.)
3. The center bushing for Quick Hitch attachment is
bolted to the upper center hitch holes.
22
SB1051, SB1064, SB1574, & SB2584 with S/N 881641+ Snow Blowers 370-430M
Table of Contents
Bushing Is Located In
Lower Hitch Holes
For Quick Hitch.
Hitch Pins Are Located In
Bottom Hitch Holes For
3-Point And Quick Hitch.
Customer To Supply Bushings
For Quick Hitch if needed.
Standard 3-Point & Quick Hitch Hook-up
Bushing Is Located
In Lower Hitch Holes
Hitch Pins Are Located
In Upper Hitch Holes
For 3-Point Hitch
Bushing Located
In Upper Hitch
Holes For
Quick Hitch.
Hitch Pins Are Located In Upper
Hitch Holes For Quick Hitch.
Customer To Supply Bushings If
Needed.
Figure 4-1
Special 3-Point Hitch Hook-up
Figure 4-2
Special Quick Hitch Hook-up
Figure 4-3
Use Upper Hitch
Holes For Center
3-Point Link
37096
Use Upper Hitch
Holes For Center
3-Point Link
37096
37096
1/23/19