Page 1
Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French Language, please see your Land Pride dealer. Printed 11/9/20...
Machine Identification Record your machine details in the log below. If you replace this manual, be sure to transfer this information to the new manual. If you, or the dealer, have added Options not originally ordered with the machine, or removed Options that were originally ordered, the weights and measurements are no longer accurate for your machine.
Page 3
Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Page 4
Parts Manual for this equipment. for Land Pride products. Download the appropriate App on your Refer to Parts Manual QR smart phone, open the App, point your Locator on this page for phone on the QR code and take a picture.
Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol Careful operation is your best The SAFETY ALERT SYMBOL indicates there is a assurance against an accident.
Replace parts on this attachment correct tools and equipment. follow all shutdown procedures with genuine Land Pride parts only. Always properly match the wheel before leaving the operator’s seat to Do not alter this attachment in a way size to the properly sized tire.
Use Seat Belt and ROPS Keep Riders Off Lights and Devices Machinery Land Pride recommends the use of a CAB or roll-over-protective- Slow moving tractors, and Never carry riders on tractor or structures (ROPS) and seat belt self-propelled equipment can implement.
Page 8
Important Safety Information These are common practices that may or may not be applicable to the products described in this manual. Avoid crystalline Silica Be aware of and follow OSHA If possible, change into disposable (or other local, State, or Federal) or washable work clothes at the (quartz) Dust guidelines for exposure to airborne...
Page 9
Important Safety Information This page left blank intentionally. 11/9/20...
Spray soapy water onto the cleaned area. all damaged or missing labels. Order new labels from your Peel backing from label and press label firmly onto the nearest Land Pride dealer. To find your nearest dealer, surface. visit our dealer locator at www.landpride.com.
Page 11
Table of Contents Important Safety Information 39713 858-215C Danger: Roll Over Crushing Hazard 11/9/20 SPL0548 & SPL0560 Snow Pusher 303-454M...
Table of Contents Introduction Introduction Owner Assistance Land Pride welcomes you to the growing family of new product owners. This Snow Pusher has been designed The dealer should complete the Online Warranty with care and built by skilled workers using quality Registration at the time of purchase.
Table of Contents Section 1: Options & Accessory Set-up Section 1: Options & Accessory Set-up Tractor Requirements Dealer Preparations The Snow Pusher is designed to attach to tractor loaders Ensure that the intended tractor conforms to the requirements stated under the heading “Tractor equipped with or without a BX Quick Hitch.
Page 14
Pull Back (Optional) 39714 Refer to Figure 1-2: Land Pride offers an optional pull back (#2). It is shipped complete with mounting hardware (#3, #4, #5, & #6). This option will allow operator to pull snow away from garage doors and other objects while backing up. See Figure 1-2 for part numbers and descriptions.
Page 15
Section 1: Options & Accessory Set-up Steel Blade (Optional) 39715 Refer to Figure 1-4: Land Pride offers optional steel blade kits complete with mounting hardware. See Figure 1-4 for part numbers and descriptions. IMPORTANT: Steel blades are not designed to move soil, rock, and other compacted surfaces.
Page 16
Table of Contents Section 1: Options & Accessory Set-up 39717 Kubota’s Original Quick Hitch Option No. BX6315 Detail A See Detail A Hook-up With Kubota’s Original Quick Hitch Figure 1-6 Hook-up With BX Quick Hitch Follow instructions below if hooking Snow Pusher to “Kubota Original Quick Hitch”...
Page 17
Table of Contents Section 1: Options & Accessory Set-up Unhook With BX Quick Hitch WARNING To avoid serious injury or death: The Snow Pusher is back heavy and can tip over backwards easily once unhooked. Always unhook unit on level ground with support blocks under the skid shoes at the back to tip the unit forward.
Page 18
Prepare to install both bolt-on hitch plates (#2) by lining up the plate’s lower lugs (#9) to the inside of the Land Pride’s “BX to Two Lever Hitch Adapter Option” Snow Pusher’s outer clevises. is required when hooking the Snow Pusher to BX80 Series Kubota tractors using a two lever hitch.
Page 19
Table of Contents Section 1: Options & Accessory Set-up Hook-up with BX80 Two Lever Hitch Unhook With BX80 Two Lever Hitch WARNING WARNING To avoid serious injury or death: To avoid serious injury or death: The Snow Pusher is back •...
Page 20
Pin upper center clevis to the hydraulic cylinder rod with hitch pin (#2). Secure hitch pin with hex bolt (#3) Land Pride’s “BX Loader Direct Pin Option” is required and lock nut (#4). Thread lock nut up snug; do not when hooking Snow Pusher directly to the front loader tighten.
Page 21
Table of Contents Section 1: Options & Accessory Set-up Unhook BX Loader Direct Pin Refer to Figure 1-9 on page 16: WARNING To avoid serious injury or death: The Snow Pusher is back heavy and can tip over backwards easily once unhooked. Always unhook unit on level ground with support blocks under the skid shoes at the back to tip the unit forward.
Page 22
Land Pride’s “BX80 Loader Arm Pin-on option” is required when hooking the Snow Pusher to BX80 Series DANGER Kubota tractors. See your nearest Land Pride dealer to order this option. To avoid serious injury or death: A crushing hazard exists while hooking-up and unhooking the implement.
Page 23
Table of Contents Section 1: Options & Accessory Set-up Unhook BX80 Loader Arm Pin-on 4. Screw adjustment bolts (#4) fully into adjusting block (E) as shown in Figure 1-13. Screw jam nuts WARNING (#5) 3 or 4 full turns onto bolts (#4). To avoid serious injury or death: The Snow Pusher is back 5.
Table of Contents Section 2: Operating Procedures Section 2: Operating Procedures • Operator’s Responsibilities Avoid hitting solid objects with this attachment as it does not have a trip mechanism. Solid objects can damage Hazard control and accident prevention are dependent equipment and throw operator forward causing loss of upon the awareness, concern, prudence, and proper control, bodily injury, or death.
Page 25
Follow these procedures and any additional shutdown Manual, completed the operating checklist, and properly procedures provided in your tractor Operator’s Manual attached your Land Pride Snow Pusher to your tractor before leaving the operator’s seat. loader, you are about ready to begin work. The Snow...
Replace any worn, damaged, or illegible safety labels by obtaining new labels from your nearest Land Pride dealer. The parts on your Snow Pusher have been specially designed and should only be replaced with genuine Land Pride parts.
Page 27
Table of Contents Section 3: Maintenance Steel Blade (Optional) 39721 Refer to Figure 3-2: Replace steel blade (#3) before its cutting edge is worn even with bottom of moldboard (#4). DANGER To avoid serious injury or death: Always secure equipment with solid, non-concrete supports before working under it.
Page 28
Table of Contents Section 3: Maintenance Poly Blade (Optional) Refer to Figure 3-3: The optional poly blade (#4) can be reversed to extend its life. Reverse poly blade before its cutting edge is worn even with bottom of moldboard (#5). Replace poly blade before both cutting edges have worn even with bottom of moldboard (#5).
Land Pride Parts only. 3. Repaint parts where paint is worn or scratched to prevent rust. Ask your dealer for Land Pride aerosol touch-up paint. Paint is also available in touch-up bottles with brush, quarts, and gallon sizes by adding TU, QT, or GL to the end of the aerosol part number.
Table of Contents Section 4: Specifications & Capacities Section 4: Specifications & Capacities SPL05 Series Specifications & Capacities Model Numbers SPL0548 SPL0560 Working width 48" (1.22 m) 60" (1.52 m) Capacity (approximate) 9 ft (.25m 12 ft (.34 m Weight...
Table of Contents Section 5: Features & Benefits Section 5: Features & Benefits SPL05 Series Features Benefits Designed to fit Kubota’s BX tractors Easy to attach to Kubota’s BX tractor loaders with or without Kubota BX6315 with front loaders Quick Hitch. A good fit for Kubota BX tractors with front loaders.
This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.