Land Pride SB10 Series Operator's Manual page 11

Introduction
Introduction
Land Pride welcomes you to the growing family of new
product owners. This Snow Blower has been designed
with care and built by skilled workers using quality
materials. Proper assembly, maintenance, and safe
operating practices will help you get years of satisfactory
use from this product.
Application
Land Pride offers the SB10, SB15, and SB25 Series of
residential Snow Blowers ranging from 51" up to 84" in
width. They are 3-point rear mounted units for attaching
to tractors ranging from 30 to 105 hp with Cat. l or Cat. ll
hitches and are Quick Hitch adaptable. These Snow
Blowers are primarily designed to remove snow from
driveways, parking lots, and sidewalks in general
residential areas. Optional lower wear bar, outer depth
wear bar, and inner or outer depth shoes can be
purchased with all models to increase the life of the units.
See "Specifications & Capacities" on page 37 and
"Features & Benefits" on page 39 for additional
information and performance enhancing options.
Using This Manual
•
This Operator's Manual is designed to help familiarize
the operator with safety, assembly, operation,
adjustments, troubleshooting, and maintenance. Read
this manual and follow the recommendations to help
ensure safe and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator's or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com.
Terminology
See Figure 1: "Right" , "Left" , "Front" , & "Back" as used in
this manual is determined by facing in the direction the
machine will operate while in use unless otherwise
stated.
Definitions
IMPORTANT: A special point of information related
to the following topic. Land Pride's intention is this
information must be read & noted before continuing.
NOTE: A special point of information that the
operator should be aware of before continuing.
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Snow Blower have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
1/23/19
Table of Contents
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Land Pride dealer. For
location of your serial number plate, see Figure 1.
37081
Further Assistance
Your dealer wants you to be satisfied with your new Snow
Blower. If for any reason you do not understand any part
of this manual or are not satisfied with the service
received, the following actions are suggested:
1. Discuss any problems you have with your implement
with your dealership service personnel so they can
address the problem.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem, and request assistance.
3. For further assistance write to:
SB1051, SB1064, SB1574, & SB2584 with S/N 881641+ Snow Blowers 370-430M
Serial Number Plate Location
Figure 1
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
lpservicedept@landpride.com
7