Page 1
Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French Language, please see your Land Pride dealer. Printed 3/31/21...
Serial Number Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov SBD3596 & SBD35108 Snow Blowers 370-347M 4/9/21...
Page 3
Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Page 4
Land Pride products. App on your smart phone, open the App, Refer to Parts Manual QR point your phone on the QR code and Locator on this page for take a picture. detailed instructions. SBD3596 & SBD35108 Snow Blowers 370-347M 4/9/21...
Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol Careful operation is you best The SAFETY ALERT SYMBOL indicates there is a assurance against an accident.
Replace parts on this implement correct tools and equipment. follow all shutdown procedures with genuine Land Pride parts only. Always properly match the wheel before leaving the operator’s seat to Do not alter this implement in a way size to the properly sized tire.
Use Seat Belt and ROPS Keep Riders Off Lights and Devices Machinery Land Pride recommends the use of a CAB or roll-over-protective- Slow moving tractors, and Never carry riders on the tractor structures (ROPS) and seat belt self-propelled equipment can or implement.
Page 8
Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Avoid crystalline Silica Be aware of and follow OSHA If possible, change into disposable (or other local, State, or Federal) or washable work clothes at the (quartz) Dust guidelines for exposure to airborne...
Page 9
Important Safety Information This page left blank intentionally. 4/9/21...
Spray soapy water onto the cleaned area. all damaged or missing labels. Order new labels from your Peel backing from label and press label firmly onto the nearest Land Pride dealer. To find your nearest dealer, surface. visit our dealer locator at www.landpride.com.
Page 12
818-132C 35711 Danger: Thrown Object Hazard 2-Places: On both sides of chute 35711 818-130C Caution: Use with 540 rpm power take-off only 818-240C Caution: Use with 1000 rpm power take-off only SBD3596 & SBD35108 Snow Blowers 370-347M 4/9/21...
Page 13
1-Place: Back right side Back right side shown 35760 838-614C 2" x 9" Amber Reflector 2-Places: Front left side and front right side Fron-t right side shown 35711 858-148C Warning: Pinch Point Hazard 4/9/21 SBD3596 & SBD35108 Snow Blowers 370-347M...
The SBD3596 with its 8 ft. (2.44 m) width attaches to the warranty page. Always provide model number and tractors ranging from 85-135 hp (63-93 kW) with 540 serial number when ordering parts and in all power take-off speed.
Draw nuts (#9) up snug, do not tighten at this time. 8. Adjust rotational stop (#5) to a position that will not interfere with the discharge chute. Tighten hex nuts (#9) to the correct torque. SBD3596 & SBD35108 Snow Blowers 370-347M 4/9/21...
Page 18
5. Tighten eight hex flange nuts (#1 & #1A) to the correct shaft. Keep bell base (#4) for 1000 rpm installation. torque. Store mounting hardware (#9, #13, & #14) for coverting back to 540 rpm SBD3596 & SBD35108 Snow Blowers 370-347M 4/9/21...
Page 19
15. Driveline installation instructions must be rechecked 3. Secure opposite end of horizontal guard with hand for field conversion units to verify proper fit-up. Refer knob (#6). Hand tighten knob. to “Driveline Installation” on page 16. 4/9/21 SBD3596 & SBD35108 Snow Blowers 370-347M...
11. Align slots in bell (#6) with bolts in bell mount (#8) and push bell onto the bolts. 12. Turn bell (#6) clockwise until slots come against bolts (#8). 13. Secure bell (#6) with knob (#7). Hand tighten knob. SBD3596 & SBD35108 Snow Blowers 370-347M 4/9/21...
Page 21
3-point hitch pins (#5) when needed. 3. The upper hitch pin (not shown) is not required. Standard Quick Hitch Hook-up NOTE: The lower 3-point hitch pin holes are not Figure 2-5 Quick Hitch adaptable. 4/9/21 SBD3596 & SBD35108 Snow Blowers 370-347M...
Page 22
NOTE: Land Pride’s Quick Hitch can be attached to the tractor to provide quick and easy 3-point hook- up and detachment. See your nearest Land Pride dealer to purchase a Cat.
IMPORTANT: An additional driveline may be lever. required if implement is attached to more than one tractor or if a Quick Hitch is used. 4/9/21 SBD3596 & SBD35108 Snow Blowers 370-347M...
8. Lower implement to the ground and shut tractor down implement onto the support blocks. using “Tractor Shutdown Procedure”. 4. Without changing the 3-point lift height, shut tractor down using “Tractor Shutdown Procedure”. SBD3596 & SBD35108 Snow Blowers 370-347M 4/9/21...
Page 25
If included, disconnect optional hydraulic cylinder hoses (#8 & #10) from the tractor duplex outlet. d. Wrap hydraulic hoses around Snow Blower hitch frame for storage and to keep dirt away from quick disconnect couplings. 4/9/21 SBD3596 & SBD35108 Snow Blowers 370-347M...
2. Push on hydraulic control lever to adjust deflector up sure wire retainer is caught over end of pin. and pull on hydraulic control lever to adjust deflector down. 3. Resume snow blowing once new deflector angle is set. SBD3596 & SBD35108 Snow Blowers 370-347M 4/9/21...
2. Push on hydraulic control lever to rotate chute to the left and pull lever to rotate chute to the right. 3. Resume snow blowing once new chute angle is set. 4/9/21 SBD3596 & SBD35108 Snow Blowers 370-347M...
Consult your tractor’s manual for acceptable inclines the tractor is and your direction of travel. capable of traveling across. SBD3596 & SBD35108 Snow Blowers 370-347M 4/9/21...
Never swing front of someone else’s property, streets, or sidewalks. tractor or tractor mounted front loader into fire hydrants mail boxes, buildings, vehicles, fences, trees, or other standing obstacles. 4/9/21 SBD3596 & SBD35108 Snow Blowers 370-347M...
Snow Blower’s rated power take-off speed. Stop power take-off immediately if an unusual sound is heard. 11. Investigate cause of noise and make repairs before putting Snow Blower back into service. SBD3596 & SBD35108 Snow Blowers 370-347M 4/9/21...
Snow Blower so low as to pick-up gravel and rock. backing up. Do not use rear view mirrors to view direction of travel while backing up. It is very important that you get a full field of view to prevent an accident. 4/9/21 SBD3596 & SBD35108 Snow Blowers 370-347M...
Page 34
With a little practice you will be pleased with what you or backing up removing snow. Never swing front of tractor and your Land Pride Snow Blower can do. Whether you or tractor mounted front loader into fire hydrants, mail...
Two Holes (#3) Are For Storing shearbolts on hand at all times. Shearbolts can be Drive Shaft Shearbolts purchased from your nearest Land Pride dealer. Unscrew knob (#5). 2. Turn bell ring (#4) counterclockwise and remove from bell base (#3) to access shearbolt (#2) in driveline.
3. Inspect drive chain for wear or have your nearest hole “A” with 1/2"-13 x 1 1/4" GR5 carriage bolt (#2) Land Pride service center inspect the drive chain. and hex flange locknut (#3). 4. A worn drive chain will accelerate sprocket wear.
3. Tighten locknuts to the correct torque. 4. Insert new skid shoe (#1) in skid shoe mount (#2) until at the same height of the removed skid shoe. 35715 Lower Wear Bar (Lower Flighting Removed for Clarity) Figure 5-8 SBD3596 & SBD35108 Snow Blowers 370-347M 4/9/21...
Section 5: Maintenance & Lubrication Hydraulic System 4. Repaint parts where paint is worn or scratched to prevent rust. Ask your Land Pride dealer for aerosol touch-up paint. Paint is also available in touch-up WARNING bottles with brush, quarts, and gallon sizes by adding To avoid serious injury or death: TU, QT, or GL to the end of the aerosol part number.
Page 40
Type of Lubrication: Multi-purpose Grease Quantity = As needed Required Drive Chain Type of Lubrication: Commercial chain lubricant Quantity = As needed. Be sure to lubricant drive chain just before storing the Snow Blower. 35750 SBD3596 & SBD35108 Snow Blowers 370-347M 4/9/21...
Disconnect driveline shaft from the tractor and slide apart. Clean and coat the inner tube of the driveline shaft with a light film of grease and then reassemble. Type of grease = Multi-Purpose Quantity = Coat Generously 35676 4/9/21 SBD3596 & SBD35108 Snow Blowers 370-347M...
Multiple surfaces allows you to pick the correct skid shoe for your application. Hydraulically controlled Gives the operator the ability to change distance snow is being blown from the discharge deflector chute using a hydraulic control lever, without having to get out of the cab. SBD3596 & SBD35108 Snow Blowers 370-347M 4/9/21...
Auger is bent or broken. Repair or replace damaged auger. Impeller blades are bent or broken. Repair or replace damaged blades. Snow is left on the ground Skid shoes are set too low. Raise skid shoes up. 4/9/21 SBD3596 & SBD35108 Snow Blowers 370-347M...
Driveline Shear Bolt M10 x 1.5 x 55 or 60 GR8.8 31 ft. lbs. (See “Figure 5-3” on page 32) Drive Shaft Shear Bolt 5/16"-18 x 1" GR5 17 ft. lbs. (See “Figure 5-4” on page 32) SBD3596 & SBD35108 Snow Blowers 370-347M 4/9/21...
This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.