Table of Contents
Advertisement
Channel Measurements (SA Mode)
Optionally apply a Radio Standard which changes
frequency settings, Res BW, and other relevant settings
to that of the selected standard. Then change the
frequency range by selecting channel numbers.
1. Press Freq/Dist then
Scroll to select the standard.
2. Then press Back.
3. Then press
4. If active, press
Uplink
and
5. Optionally, change the
allows you to use the
channel number by the specified value.
6. Then
Back
7. Press Measure 1 then
choose from the following:
Channel Power (CHP) - Measures total power over
-
the specified Integrated BW.
Occupied Bandwidth (OBW) - Measures the power
-
of the current frequency span and displays vertical
posts between which the specified percentage of
power is contained.
Adjacent Channel Power (ACPR) - Measures the
-
power of a carrier channel and one, two, or three
adjacent (offset) channels.
More
Unit Freq
Chan.
Chan Direction
Downlink
frequencies.
▲|▼
and Center, Start, or
Channel Measurements
Radio
then
to toggle between
Channel Step
arrows to increment the
Stop
11
Standard.
size which
channel.
and
Advertisement
Table of Contents
