Gerber EDGE Owner's Manual page 50

44 GERBER EDGE Owner's Guide
Message
PRINTING IMAGE
PROCESSING IMAGE
THERMISTOR ERROR
WARMING UP
WARMUP ERROR
Z-AXIS HOME ERROR
Required Action
None.
Wait for printing to start.
Wait for printhead to cool down. When
printhead is sufficiently cool, the
message is displayed.
Wait for machine to warm up and
message to display.
If warmup takes longer than 5 minutes, this
non-recoverable error message appears. Press
the Reset key and call the Gerber Field Service
Department.
Call the Gerber Field Service Department.
Paused
OFFLINE