Gerber EDGE Owner's Manual page 43

Offline mode
When the
While off line, you can press keys to slew the vinyl (VS) or the foil (FS), or set
Home (XH). Slewing stops when the key is released. Check the printing ability
and printhead cleanliness by pressing the PRINT TEST (PT*) key. To stop the
print test, press the RESET (RS) key. To change the
setting, and print test pattern, press the SETUP (SU) key to enter the Setup
menu. After making changes, press the RESET key to return to the Offline mode.
For additional information about the Setup menu, refer to the "Setup Menu"
paragraph on page 39.
Online Idle mode
While off line, pressing the ONLINE (ON) key puts the
mode and the
the Offline mode. When the Plot program sends a job for printing, the
enters the Online Print mode.
Online Print mode
The
EDGE
Printing is complete and the
You press the RESET (RS) key. The job pauses and the display asks you to
CONFIRM RESET
You press the ONLINE (ON) key and enter the Online Paused mode.
An error occurs, an error message is displayed in the message display area,
and the
is turned on (Power On), the
EDGE
is ready to print. Pressing the RESET (RS) key returns to
EDGE
stays in the Online Print mode until one of four things happens:
EDGE
.
enters the Online Error mode.
EDGE
Mechanical Description
is in the Offline mode.
EDGE
checksum, overlap
EDGE
in the Online Idle
EDGE
returns to the Online Idle mode.
37
EDGE