Gerber EDGE Owner's Manual page 34

28 GERBER EDGE Owner's Guide
The platen
Wipe the platen with a clean, lint-free pad moistened with isopropyl alcohol to
remove any debris. Allow to air dry before loading vinyl. Refer to the illustration
to locate the areas to clean.
Cleaning the platen, bail arm, squeegees, sprockets, and cassette pins.
The bail arm, squeegees, sprockets, and cassette pins
Wipe the bail arm squeegees and bail arm with a clean, lint-free cloth moistened
with isopropyl alcohol. Use a small brush, such as a toothbrush, dipped in
isopropyl alcohol to clean the sprockets and cassette pins. Do not soak the brush
in alcohol so that excess alcohol drips into the
pins to air-dry before loading vinyl. Refer to the illustration to locate the areas to
clean.
Note: Isopropyl alcohol may discolor the squeegees over time. Discoloring
does not affect the operation of the squeegees.
. Allow the sprockets and
EDGE