Online Measurement And Calibration; Setting Up An Online Measurement - Bosch VCU Manual

13 | Online Measurement and Calibration

13.1 Setting up an online measurement

70 / 136
13 Online Measurement and Calibration
Vehicle Control Unit VCU configuration
– System configuration (channel + display configuration, CAN I/O, etc.) is stored in the
Vehicle Control Unit VCU
– Use RaceCon to create and download configuration from the PC to Vehicle Control
Unit VCU Communication interface: Ethernet
– Communication protocol: XCP
Online Measurement and Calibration
– System status and diagnosis
– Check and calibrate sensors in the vehicle
– Live display of sensor values on the PC
– Use RaceCon for diagnosis, online measurement and calibration
– Communication interface: Ethernet
– Communication protocol: XCP
Vehicle Control Unit VCU supports online measurement of sensor values and diagnostic
variables.
1. Expand 'Measurement Container' and 'Measurement Folder 1' in the Project Tree and
double-click on 'Sheet1'. Alternatively, click on the 'Calibration/Measuring' tab to
open the window directly.
'Sheet 1' opens in a new 'Calibration/Measuring' window.
RaceCon changes
automatically
to "Calibration/
Measuring"
Vehicle_Control_Unit_VCU_Manual Bosch Motorsport