Bosch VCU Manual page 84

14 | Recording
14.3.1 Recording data on USB device
84 / 136
Colors matching a standard USB cable
Storage device
The recording function can be used with a dedicated Bosch Motorsport USB device. The
USB device has to be preformatted with the Bosch File System (BFS) in RaceCon before
first use.
To format the USB device with the Bosch File System (BFS), do the following steps:
In RaceCon, select 'Tools' - 'Extras' and choose 'Format USB stick'.
Press 'Format'.
An USB device is recognized by Windows as a 'storage medium', but it can only be initial-
ized with RaceCon and read with WinDarab.
1. Plug an USB device to Vehicle Control Unit VCU.
2. Prepare a recording configuration in RaceCon.
3. Power on the system and connect with RaceCon to the vehicle.
4. Download the configuration to the Vehicle Control Unit VCU.
5. Record measurement data. If an USB device is present, the Vehicle Control Unit VCU
stores the data in parallel on the internal memory and the USB device.
6. Power off the system.
7. Remove USB device from the vehicle.
8. Start the WinDarab software.
Vehicle_Control_Unit_VCU_Manual Bosch Motorsport