Bosch VCU Manual page 27

Bosch Motorsport
NOTICE
Refer to the WinDarab V7 manual for instructions on how to use the
'Data Logger Import' dialog and for more detailed descriptions and
instructions.
9. Choose the device and the IP address for the device.
10. Click 'Apply changes' when done.
11. Connect the Vehicle Control Unit VCU network cable.
12. Click on the 'Current Import' tab.
13. Click on 'Import' in the lower right corner.
If the 'Import all on connect' box is checked, the data transmission from the Vehicle
Control Unit VCU starts automatically. Measurement files are stored automatically in
the folder defined under 'Settings'.
14. Click on 'Close' when the transmission has finished.
15. Click on the Start button and choose 'Open measurement file'.
16. Select the measurement files from the storage folder.
17. Click on 'Open'.
18. Click on 'New Desktop' to open a new measurement data window.
Vehicle_Control_Unit_VCU_Manual
Starting Up | 8
Choose VCU
from
dropdown list
27 / 136