Bosch VCU Manual page 57

11.2.4 Configuring a multipoint adjustment
Bosch Motorsport
Measurement label
raw_name
raw_name_fi
name
name_fi
NOTICE
Working with automatically created measurement sheets is ex-
plained in chapter 'Setting up an online measurement [} 70]'.
Example: Measurement of wheel force
– Physical property 'wheel force' not directly measureable
– Load transfer through suspension kinematics
– Physical value at sensor position defined by vehicle
– Curve definition by online adjustment at vehicle
1. Click on 'Measurement Sources' in the Toolbox.
2. Expand the list of 'I/O Channels' by clicking on '+' in the Vehicle Control Unit VCU
Project Tree.
3. Drag the 'Multipoint Adjustment' analog signal source from the Toolbox and drop it
on the desired analog input channel in Vehicle Control Unit VCU Project Tree.
Vehicle_Control_Unit_VCU_Manual
Analog and Frequency Inputs | 11
Function
mV value of sensor
filtered mV value of sensor
physical value of sensor
filtered physical value
57 / 136