Scope Of Delivery; Special Accessories; System Tester; Diagnosis Terminals/Measurement Terminals - Bosch KTS 5 Series Original Instructions Manual

en 18 | KTS 530 / 540 / 570 (KTS 5 Series) | Device description
3.3

Scope of delivery

i
The scope of delivery depends on the product variant
ordered as well as the special accessories ordered,
and can deviate from the following list.
Designation
System tester KTS 530
1)
System tester KTS 540
1)
System tester KTS 570
1)
Bluetooth USB-Adapter (KTS 540 / 570)
OBD diagnosis cable 3 m (KTS 530)
OBD diagnostic cable 1.5 m
(KTS 540 / 570)
UNI connection cable, 4 core
USB connection cable 3 m
Power supply unit
Measurement cable, blue/yellow (KTS 530 /
540)
Measurement cable, yellow (KTS 530 / 540)
Measurement cable, red/black (KTS 570)
Measurement cable, blue/yellow (KTS 570)
Test prod, red (1x, on KTS 570 2x)
Measuring probes (3x)
Ground cable, black
Alligator clip, black
Case
Mounting bracket
with self-tapping screw (2x)
and oval head screw (3x)
DVD B1 ESI[tronic] 2.0
DVD A1 ESI[tronic] 2.0
Important information and safety instructions
Product description
depending on order
1)
!
Use the UNI connection cable (1 684 463 539) only for
measurement with less than 30 V.
!
Use measurement cables for measurements smaller
than 60 VDC, 30 VAC or 42 VACpeak only!
The accessories must only be used in circuits
which are not connected to a mains voltage
supply (measuring category 0 according to
EN 61010-2-030:2010). The enclosed accesso-
ries must only be used with Bosch products,
and at voltages below the voltage value as
imprinted on the accessories. When combin-
ing accessories, it must be ensured that the
lowest voltage value imprinted on the acces-
sories is not exceeded.
3.4

Special accessories

Information on optional accessories, such as vehi-
cle-specific connection cables, extra measurement ca-
bles and connection cables, can be obtained from your
authorized Bosch dealer.
|
1 689 979 987 2015-09-22
3.5
3.5.1
Order number
CH2
–
–
–
1 687 023 777
1 684 465 557
1
1 684 465 555
1 684 463 539
Fig. 1:
1 684 465 562
1 Measurement input CH2 (for KTS 570 only)
1 687 023 693
2 Ground port
1 684 430 066 3 Measurement input CH1(–)
4 Measurement input CH1(+)
5 Port for OBD connection cable (DIAG)
1 684 430 067
1 684 463 214
1 684 463 550
3.5.2
1 684 485 438
1 684 050 050
1 684 430 068
1 684 480 022
15V DC
1 685 438 648
1 681 398 030
2 910 611 405
2 910 641 118
1 987 729 601
1 987 P12 037
1 689 979 922
1 689 979 987
Fig. 2:
1 Power supply unit connection
2 LED A and LED B (see sec. 3.5.3)
3 USB port

System tester

Diagnosis terminals/Measurement terminals

max. 60V
CH1
3
2 4
Diagnosis terminals/Measurement terminals

Connection panel

A B
1
Connection panel
DIAG
459802/12 Ko
5
USB
459802/11 Ko
2 3
Robert Bosch GmbH