Bosch VCU Manual page 58

11 | Analog and Frequency Inputs
58 / 136
Drag + Drop
A 'Multipoint Adjustment Wizard' opens.
4. To activate the internal pullup-resistor, check the box. The internal pullup-resistor is
used to get a 5 V signal at the analog channel of the Vehicle Control Unit VCU. It al-
lows you to use a push-button. The fixed value of the internal pullup-resistor is 3.01
kOhm. If using an additional external pullup-resistor, set up the overall resistance.
5. Click 'Next' when done.
The second part of the 'Multipoint Adjustment Wizard' opens.
Vehicle_Control_Unit_VCU_Manual Bosch Motorsport