Bosch VCU Manual page 51

Bosch Motorsport
The "Bosch Sensor Wizard" opens.
1st: Choose the
sensor´s category
2nd: To narrow your
choice, choose a
type
3rd: Select the
exact type
Opens sensor´s
datasheet
4. Click 'Finish' when done.
The "Create channel" window opens.
5. Enter the channel name and description.
6. Click 'Ok' when done.
The channel is inserted into the Vehicle Control Unit VCU Project Tree.
Channel is linked
to ANA03
Available measurements for channel:
Measurement label
raw_name
raw_name_fi
name
name_fi
Vehicle_Control_Unit_VCU_Manual
Analog and Frequency Inputs | 11
Input pin Pull-up
resistor is activated
Function
mV value of sensor
Filtered mV value of sensor
Physical value of sensor
Filtered physical value
These calibration
values will be used
Calculation of
physical value with
characteristic curve
51 / 136