Table of Contents
Advertisement
17 | Firmware
17.2.1 Performing the firmware update
114 / 136
Firmware update is only possible if the Vehicle Control Unit VCU is connected to RaceCon.
The configuration of Input channels, CAN I/O, display, recording + telemetry will not be
changed.
1.
In the Vehicle Control Unit VCU Project Tree, right-click on 'Vehicle Control Unit VCU'
and choose 'Synchronize' then 'Update firmware'. A pop-up menu opens.
2.
Select the destination of the firmware archive (PST). You can find the latest firmware
for the device at the Bosch Motorsport homepage.
3.
Click 'OK' when done. The firmware update starts. The Vehicle Control Unit VCU dis-
plays the message 'Updating firmware'. Do not switch off the car's ignition or inter-
rupt the power supply of the Vehicle Control Unit VCU!
Vehicle_Control_Unit_VCU_Manual
Bosch Motorsport
Hide quick links:
Advertisement
Table of Contents
