Engine; Engine Replacement; Engine Removal - Toro Z Master G3 3000 Series Service Manual

Engine Replacement

Note: The following procedure for removing and
installing the engine was performed on a
Kohler 29 HP EFI engine. You can follow the
same procedures for removing other engines
from the Z Master G3, 3000, 5000, and 6000
Series units.

Engine Removal

1. Remove the battery negative and positive cables.
Remove the battery from the frame.
2. On tilt seats, lift the seat up, or non-tilt seats, slide
the seat forward and turn the fuel shut off valve to
the OFF position (Fig. 219).
Fig. 219
Toro Z Master G3 3000/5000/6000 Series Service Manual
3. Raise the machine in the rear and support it with
jack stands (Fig. 220).
4. Remove the 3 carriage bolts and nuts retaining the
RH bumper to the frame (Fig. 221).
DSCN-4635a

ENGINE

Fig. 220 DSCN-0071a
Fig. 221 DSCN-4637a
4
4-1