Toro Z Master G3 3000 Series Service Manual page 59

CHASSIS
5. Route the brake cable through the two clips located
under the frame of the unit and tighten (Fig. 138).
3
6. Squeeze the tabs on the conduit fitting and install in
the cable bracket located on the frame (Fig. 139).
3-38
Fig. 138 DSCN-4328a
Fig. 139
DSCN-4327a
7. Slide the brake cable into the cable anchor slot on
the transmission (Fig. 140).
8. Install the end of the brake cable through the cable
anchor and install an e-ring (Fig. 141).
Toro Z Master G3 3000/5000/6000 Series Service Manual
Fig. 140 DSCN-4325a
Fig. 141
DSCN-4361a