Toro Z Master G3 3000 Series Service Manual page 2

This service manual was written expressly for Toro service technicians. The Toro Company has made every effort to
make the information in this manual complete and correct.
Basic shop safely knowledge and mechanical/electrical skills are assumed. The Table of Contents lists the systems
and the related topics covered in this manual.
The following service materials are available in addition to this service manual:
Hydrostatic Transmissions: Parker UHT Series HB Hydrostatic Transmission Service Manual (HY13-1512-M2/US)
Wheel Motors:
Engine:
Hydraulic Troubleshooting: Interactive Hydraulic Systems Troubleshooting DVD - Toro Part #492-4777
Electrical Troubleshooting:
The Z Master G3, 3000, 5000, and 6000, model years 2009 to 2012, are covered in this manual.
The hydrostatic drive system is precision machinery. Maintain strict cleanliness control during all stages of service
and repair. Cover or cap all hose ends and fittings whenever they are exposed. Even a small amount of dirt or other
contamination can severely damage the system.
We are hopeful that you will find this manual a valuable addition to your service shop. If you have any questions or
comments regarding this manual, please contact us at the following address:
The Toro Company reserves the right to change product specifications or this manual without notice.
Parker/Ross Wheel Motor Service Manual (HY13-1512-006-M1/US 3/07)
Engine service manuals (available through Kohler and Kawasaki)
Interactive Electrical Troubleshooting DVD - Toro Part #492-9193
The Toro Company
RLC Service Training Department
8111 Lyndale Avenue South
Bloomington, MN 55420
Copyright© All Rights Reserved
©2012 The Toro Company
ABOUT THIS MANUAL