Mower Spindle Disassembly (2010 & Later Model G3, 3000/5000/6000 Series Units) - Toro Z Master G3 3000 Series Service Manual

MOWER DECKS
Mower Spindle Disassembly (2010
& Later Model G3, 3000/5000/6000
Series Units)
1. Remove the 3 flange nuts retaining the pulley to the
spindle hub (Fig. 436).
2. Remove the top lock nut and washer from the
spindle shaft (Fig. 437).
6
6-18
Fig. 436 DSCN-0082a
Fig. 437 DSCN-0087a
3. Remove the spindle hub assembly (Fig. 438).
4. Remove the spindle shaft (Fig. 439).
Toro Z Master G3 3000/5000/6000 Series Service Manual
Fig. 438 DSCN-0089a
Fig. 439 DSCN-0090a