Toro Z Master G3 3000 Series Service Manual page 52

7. Install the right hand brake cable retainer into the
cradle so that the retainer tab is installed in the slot
on the cradle (Fig. 113).
Fig. 113
8. Route the brake cable behind the wheel hub and
slide the threaded end into the trunnion on the
caliper (Fig. 114).
Fig. 114
Toro Z Master G3 3000/5000/6000 Series Service Manual
9. Install the snap fitting into the slotted bracket (Fig.
115).
PICT-9111a
10. Install a standard nut and a lock nut onto the
threaded brake cable rod (Fig. 116).
A. Standard nut
PICT-9113a
11. Adjust the park brake. Refer to "Adjusting the
Parking Brake" on page 3-32.
CHASSIS
Fig. 115
A B
Fig. 116
B. Lock nut
3
PICT-9114a
PICT-9075a
3-31