Toro Z Master G3 3000 Series Service Manual page 57

CHASSIS
10. Unplug the wire harness from the park brake switch
(Fig. 130).
3
11. Remove two screws and spacers retaining the park
brake handle assembly to the frame (Fig. 131).
3-36
Fig. 130 DSCN-2617a
Fig. 131 DSCN-2619a
12. Remove the cotter pin and clevis pin on the left side
of the park brake handle (Fig. 132).
13. Remove the e-ring retaining the brake cable to the
park brake pivot assembly and slide the cables out
of the slots (Fig. 133). Slide the brake cable out of
the unit.
Toro Z Master G3 3000/5000/6000 Series Service Manual
Fig. 132 DSCN-4330a
Fig. 133 DSCN-4333