Park Brake Cable Replacement (2012 & Later); Left Park Brake Cable Removal (2012 & Later) - Toro Z Master G3 3000 Series Service Manual

CHASSIS
Park Brake Cable Replacement (2012
& Later)
Left Park Brake Cable Removal (2012 &
Later)
1. Raise the rear end of the unit and install jack stands
under the tie down loop on the frame. Remove the
RH and LH wheels from the unit (Fig. 122).
3
2. Disengage the park brake lever.
3. Remove the e-ring, washer, and brake pin from the
L-Bracket (Fig. 123).
3-34
Fig. 122 DSCN-4311a
Fig. 123 DSCN-4314a
4. Hold the threaded rod end with a tool, and with a
socket wrench remove the lock nut and washer from
the end of the cable (Fig. 124). Continue to remove
the washer and spring.
5. Remove the e-ring from the groove in the cable end,
and the cable anchor located on the transmission
(Fig. 125).
Toro Z Master G3 3000/5000/6000 Series Service Manual
Fig. 124 DSCN-4315a
Fig. 125 DSCN-4318a