Toro Z Master G3 3000 Series Service Manual page 87

ENGINE
13. Using a 1/2" drive breaker bar installed in the square
hole in the pump idler assembly, rotate the pump
idler arm counter-clockwise to relieve tension on the
v-belt (Fig. 230). Remove the v-belt from around the
engine drive pulley.
4
14. Unplug the wire plug from the electric PTO clutch
(Fig. 231).
4-4
Fig. 230 DSCN-0025a
Fig. 231 DSCN-0028a
15. Remove the bolt, spring washers, and washer
retaining the electric PTO to the engine crankshaft
(Fig. 232). Slide the clutch off the crankshaft.
16. Remove the engine sheave from the engine
crankshaft (Fig. 233).
Toro Z Master G3 3000/5000/6000 Series Service Manual
Fig. 232 DSCN-0031a
Fig. 233 DSCN-0032a