Toro Z Master G3 3000 Series Service Manual page 89

ENGINE
21. Unplug the wiring harness plug from the engine
harness plug (Fig. 238).
4
22. On the bottom of the starter solenoid disconnect the
red wire and red positive cable (Fig. 239).
4-6
Fig. 238 DSCN-0049a
Fig. 239
DSCN-0050a
23. Remove the engine from the frame (Fig. 240).
Toro Z Master G3 3000/5000/6000 Series Service Manual
Fig. 240 DSCN-0053a