SIEB & MEYER SD2 Hardware Description page 172

Appendix D: Manufacturers
20.D
172
The maximum current (I
device.
You can order the suitable SIEB & MEYER line filter for your device by its individual
article number:
SIEB & MEYER article Rated voltage (U
number
0110073E 400 V
0110080 400 V
EPCOS Line Filters
▶ 1- and 3-phase line filters
▶ high attenuation
▶ partial RCD compatibility
The maximum current (I
device.
When such a line filter is used, very high leakage currents arise, because
Cy > 1.5 μF. For this reason it is only partially compatible with an RCD
(residual current protective device).
You can order the suitable EPCOS line filter for your device at SIEB & MEYER by its
individual article number:
SIEB & MEYER article EPCOS article number Rated voltage (U
number
35063105 B84143A0016R105
35063103 B84143A0050R105
35063106 B84143A0090R105
) must be adapted to the back-up fuses of the
max
) Rated current (I )
rated rated
17 A
36 A
) must be adapted to the back-up fuses of the
max
)
rated
520 / 300 V
520 / 300 V
520 / 300 V
Drive System SD2 - Hardware Description
W
Leakage current (I )
leak
≤ 3.5 mA
≤ 3.5 mA
Rated current Leakage
(I ) current (I )
rated leak
16 A 15 mA
50 A 15 mA
90 A 18 mA